xpostok... i mean, i was pretty gentle with it, as i'd never taken one off before, but it did seem to slip on and off without much resistance. perhaps as if I was pulling the paper strip from a half-broken fortune cookie, trying not to do any further damage
― gnarly sceptre, Tuesday, 11 August 2009 16:41 (ten years ago) link
i use an ortofon needle - the same one that comes with my rega - and i just remember taking an old one off - gently - and the plastic got bent on one side. it was old and i wasn't going to use it again, but it just seemed like i barely had to do anything to damage it. i suppose you would notice pretty quick if the one on your turntable was bent in any way or misshapen.
― scott seward, Tuesday, 11 August 2009 16:48 (ten years ago) link
I think this counts as a turntable. I still have the turntables I'd mentioned earlier up-thread, but recently bought this Seeburg as a project to see if I can get it back to working order.
It was essentially dead when I got it (and had mud-dauber nests throughout the machine) but have slowly been fixing up the electronic side of the house. Once I get that somewhat set, I'm going to have to disassemble and clean the mechanism and likely fix some worn out parts. Ultimately I'm going to convert it play both large and small hole 7"s at 45rpm. It won't end up in the house but likely in a friend's bar or will sell to someone. Fun nonetheless.
― city worker, Wednesday, 27 October 2010 18:03 (nine years ago) link
that's so cool
― mizzell, Wednesday, 27 October 2010 19:15 (nine years ago) link
hey, so i sell two kinds of crosley things in the store. you know, the cheapo retro things. one is the crosley tech turntable with built in speakers and a radio. and you can plug it into a receiver if you feel like it. the other is one of those usb retro suitcase deals. and they are good for casual use by people who have a couple of old boxes of records and want to buy records occasionally. but what about just a beginner/entry-level table for 150 or less? what should i sell? denon? technics? just want one thing for people a LITTLE more serious about records, but something cheap enough to sell. and i guess it should be usb too? but it doesn't have to be.
― scott seward, Friday, 7 January 2011 18:04 (nine years ago) link
imo this one is a little janky, but certainly affordable and FINE
― 69, Friday, 7 January 2011 18:09 (nine years ago) link
I'll be watching this thread - I need to get a new turntable.
― Le mépris vient de la tête, la haine vient du cœur (Michael White), Friday, 7 January 2011 18:11 (nine years ago) link
god i wish pro-ject would put out a $150 table in different colors. i could sell something like that for sure. people who didn't even know they wanted a turntable would buy one.
― scott seward, Friday, 7 January 2011 18:12 (nine years ago) link
what kind of a turntable do you need, michael? what's your price range?
― scott seward, Friday, 7 January 2011 18:13 (nine years ago) link
i always tell people to go rega, cuz i love mine so much. and they have a range of prices. can't really go wrong with any of them. but they aren't CHEAP cheap or anything.
― scott seward, Friday, 7 January 2011 18:16 (nine years ago) link
i wish the numarks didn't look like some plastic hunk a junk. but the price is certainly right.
michael is pretty swank so he might need this one. only $150,000!
― scott seward, Friday, 7 January 2011 18:19 (nine years ago) link
The old turntable isn't grounded or something and makes a buzzing sound and I'd like to get a new one with USB capablity to record some of the gf's old vinyl. 69's suggestion looks good but in a house with insane felines, I really think it behoves me to get a dust cover. I'm not looking for anything super expensive - it's just for home listening.
― Le mépris vient de la tête, la haine vient du cœur (Michael White), Friday, 7 January 2011 18:21 (nine years ago) link
Can't see the image. Link?
these are cheap. hundred bucks.
― scott seward, Friday, 7 January 2011 18:43 (nine years ago) link
hell, that's what i should get for the store! thanks, me!
― scott seward, Friday, 7 January 2011 18:44 (nine years ago) link
Cool, thanks Scott!
― Le mépris vient de la tête, la haine vient du cœur (Michael White), Friday, 7 January 2011 18:45 (nine years ago) link
Has anyone seen one of these linear tracking turntables like the Technics sl-5 in action? I'm tempted but also a bit scared to buy one for cheap on craigslist. I'm afraid that the 'automatic' queuing of tracks may become irritating after a few weeks.
― Sufjan Grafton, Sunday, 22 July 2012 23:08 (seven years ago) link
Advance to 1:00 in this video, it shows how it works:
I had a Sharp linear-tracking turntable for awhile, one that had a slide-out drawer so you could stack things above it. It originally had two cartridges, one above & one below, so it could play both sides of a record by itself. But by the time I got it only the top side worked and unreliably at that, so I ditched it. It was kind of like this one, shown here with its case removed:
― Lee626, Monday, 23 July 2012 01:16 (seven years ago) link
Oops, not that one, but that is a way-cool turntable! WANT!
Here's the one I had:
― Lee626, Monday, 23 July 2012 01:18 (seven years ago) link
Thanks, those are very cool! I am worried about the reliability, though. It would be my main turntable since I'm trashing the old Denon I've been using. I don't see any turntables currently in production using linear tracking, so I wonder if there is a fundamental problem.
― Sufjan Grafton, Monday, 23 July 2012 01:39 (seven years ago) link
I don't know how reliable they are compared to conventional pivoting tonearms, but the supposed benefit of linear tracking was that the needle would always be at a perfect 90 degree tangent which theoretically would yield better sound quality, since records are cut using linear tracking. But in practice, there wasn't really any audible difference, and the only real advantage (in some situations) was their smaller size and for some of them, the slide-out drawers or front-load flaps and two-sided playback capability.
― Lee626, Monday, 23 July 2012 07:46 (seven years ago) link
I had a B&O linear tracking turntable. I'd thought it might cure the problem of pitch variance in records pressed slightly off-center, thinking that the linear arm might slide back and forth to compensate. But it didn't work that way; it still pivoted at one point. Made the problem worse, in fact, because of the shorter arm swinging through a greater angle. Worked fine on normal records, though.
― Thus Sang Freud, Monday, 23 July 2012 11:04 (seven years ago) link
I sold my Gyro SE/RB300/MC25FL last week - to a nice chap from Welling for whom it was his first new turntable in 40 years. And he still had that one (a Garrard 401, an 18th b'day present).
Currently using Planar 2/RB250/Bias 2 into my Cyrus Two's MM stage. It's not bad. Not sure how old the cartridge is. Bit ragged in the upper mids and sibilant on voices but everything else sounds pretty good.
― Michael Jones, Monday, 23 July 2012 11:13 (seven years ago) link
recommendations on a nice three speed turntable?my portable i was using for 78s kicked the bucket, and the one i am borrowing temporarily takes ~forever~ to get up to speed. figure it's time to buy something that will last.
― i guess i'd just rather listen to canned heat? (ian), Sunday, 9 December 2012 17:30 (seven years ago) link
Bit late to the 4 month old post, I borrowed a Technics SL-5 for a while in the late 90s, but gave it back because it sounded awful. Around the same time I had one of these though:
It sounded very good indeed, but broke after a couple of years and couldn't find anyone to fix it, so went for a Technics 1200, which has worked flawlessly since then - would recommend going for a 1200 to all but the most dedicated audiophiles.
― Chewshabadoo, Sunday, 9 December 2012 17:54 (seven years ago) link
But I would love one of these with the jog wheel:
― Chewshabadoo, Sunday, 9 December 2012 17:58 (seven years ago) link
get this when you are rich:
― scott seward, Sunday, 9 December 2012 17:59 (seven years ago) link
I wonder how niche that niche is.
― Chewshabadoo, Sunday, 9 December 2012 18:33 (seven years ago) link
I ended up buying a 1600mkII
― Santa, the toy_sleigher (Sufjan Grafton), Sunday, 9 December 2012 18:43 (seven years ago) link
Got a project debut carbon at the weekend. It looks and sounds amazing, not that I have much experience with turntables that aren't made of plastic.
― give me back my 200 dollars (NotEnough), Monday, 8 April 2013 13:31 (six years ago) link
kinda gushy at how good it sounds tbh.
Burn in is mostly bollocks tho, right?
― give me back my 200 dollars (NotEnough), Monday, 8 April 2013 13:35 (six years ago) link
i just bought a cheap turntable from this dude and it's an old Philips 212. Sounds great!
Just checked this thread because I think I want to get a better turntable than my old Ariston ATT420 sometime soon, and remembered my dad's old Philips 212 which I inherited in my teens. God, I loved that thing. Can't remember why I replaced it, and am now hankering to find another one.
― just her neck. thankig u in advance (stevie), Wednesday, 4 May 2016 10:39 (three years ago) link