turntable help

http://www.vestax.com/v/products/detail.php?cate_id=109&parent_id=10
http://www.verygoodplus.co.uk/showpost.php?p=210988&postcount=2

hey thanks!

Sorry guys I just got back to this thread,

I can't figure this out for the life of me....
I have a Sony PS250lxh turntable (essentially, everything is fixed except the needle), and upon changing the needle yesterday to another one of the exact same type, it now seems the tonearm or something is out of wack as the housing for the needle now drags across the surface of records. But there seems to be no option for adjustment. Anyone got any quick fixes for that sort of thing? I am currently trying to figure out the correct minute amount of bluetack to put under it....

Are you sure the stylus is seated correctly (there's a little plastic tab t the back that has to slip into a slot on the cartridge, I think)?

Also the needle is protruding below the bottom of the stylus, right? Just want to make sure you didn't get sold a bum needle.

tried the revised instructions?

Man stuff like this makes me so grateful to live in the same city as the needle doctor, those guys will do a free install and balance when you buy anything in store

meisenfek, I was about to be like 'ah! A solution!' but that's actually printed on the player itself! Thank you, though.

Gott punch (absolutely champion username btw), the needle is, but not by much and certainly not as much as the old one. It's completely connected right, as according to those instructions (iffy with my terminology, I bought a replacement stylus not needle, but same difference with something like this).... Is it a terrible idea to try and gently stretch force it down so it's further away from the stylus? Because if not, think I've been sold a ringer although I'm not sure how. It looks exactly the same as the old one....

Anyone know any good hi-fi shops in East London? would rather have that sort of service than buying this sort of shit off ebay again.

I wouldn't try to bend the needle down, you'd be just as likely to damage it as fix it, or bend it out of alignment. You might want to contact the seller and explain the situation and see if you can get a replacement.

Otherwise you might be best off finding a shop that sells turntables there and asking for help - we sell and install needles where I work and it's much easier diagnosing these things in person, which is probably not too surprising!

BTW I use stylus and needle interchangeably, I should probably say base to refer to the plastic part the stylus/needle protrudes from.

one thing you can do, though this is p obvious, is to get your eye right down in there so's you can clearly see the contact between needle and vinyl. the needle should be angled down w its tip a few millimeters below the cartridge & needle assembly. where it comes in contact with the vinyl, there should be a little downward-facing point. when this point comes in contact with the vinyl, the weight of the tonearm should compress the needle so that its angle is reduced about 50%. i.e., if the vertical distance from cartridge/needle assembly to the pointy tip of the needle is 3mm, then after it comes into contact with the record, that distance should be reduced to about 1.5mm by the weight of the tonearm. if you get down in there and look carefully with good lighting, the mechanics of all this will be pretty easy to sort out.

Thanks! It's coming along slowly, but now it's only doing it at the very end of 180gm records, whereas before it'd do it on everything - turns out I'd knocked the (thingy you slot the stylus into) a little to the right whilst probably changing the needle, so it was sitting at a slightly wrong angle. I guess now I find the absolute perfect angle....

so i have a 1210 mk2 deck with severely drifting and erratic tempo - any ideas how much these things take to get fixed, or with replacement parts etc? im wary of throwing money at this with little reward

you got any hunches as to what it could be? does it do it in all pitch fader positions? have a look to make sure there isn't anything dodgy looking inside. sometimes the magnet on the bottom plate loses its magnetism. anyway, spare parts are fairly easy to get hold of and nothing costs much more than £50, so you're probably looking at around £100 w/service

happens in all pitch positions and its quite pronounced, which makes me worry its more than getting a replacement pitch control, at which point not sure how expensive it gets

in that case, it's probably the magnet, the pitch control IC chip or a dodgy capacitor somewhere, all of which cost less than a tenner... good luck :)

bizarrely today the turntable isn't exhibiting any issues - it was ludicrously bad yesterday, not sure what to make of it

dear all.
i have a basic old school project debut turntable.
this weekend the bugger started skipping on everything.
mint never played before 12", classics, the lot, as soon as the needle hits the deck, skippety skip.
now, there is little configuring of this machine - a simple antiskipping device with 3 weighting options to prevent skipping.
i have tried all of the options - no difference.
i cant adjust the weight as its all configured.
only thing i can think of : new needle time ?
would that help, or is it something else ?
ta.

odd....did anything happen to it that you can think of?

i've had pretty good luck contacting customer care people at more "audiophile" companies via email, they tend to have pretty decent support....that might be a good first line of inquiry.

cheers for advise upper - was about to head that route after going through various forums for advise - which always mentions the more complex decks, but there really is little to do with this version.
however, i think i've cracked it !
the tone arm lift thing was not settling down properly, meaning the arm was not coming down completely.
with a torch (the deck is in a dark corner), i spotted an adjustment screw for the tone arm lift
.. tightened that a little et voila !
carpenters in perfection with no skipping.
phew .. .

ah cool! i was kind of flummoxed because i have a Rega P1 (very similar/comparable turntable) and those things are so damn minimal in design it's almost like there's nothing that COULD go wrong outside of all-out motor failure or a problem with your set-up

I've finally started replacing my completely ruined 80's vintage receiver/amp/speaker setup piece by piece. The old stack of stuff had an integrated amp/phono line in, but my new receiver doesn't, so I've gone with a cheap, basic Pyle preamp. For whatever reason, there's no ground screw, or at least no screw specially designated as ground. Apparently it should look like this:

http://ecx.images-amazon.com/images/I/51qtMGDk2yL.jpg
http://ecx.images-amazon.com/images/I/51SWbgrFjmL.jpg

I mean, I have that screw, it's holding the case shut, but there's no metal washer behind it. Should I just ignore it and ground the turntable directly to the receiver? Please assume I'm a complete idiot; this is the first time I've actually set up a sound system instead of just inheriting one.

You can ground it to the preamp case without a washer perhaps (just secure one part of the horseshoe shaped contact). Or buy a washer.

The only turntables I've ever had have been cheapo Vestax-type things. I don't have a stereo system.

What advice would you give a *total idiot* about what turntable they should buy? Here's one of my many stupid questions: Can you plug a turntable directly into speakers?

I guess I have about £400 to spend. Is that too little for anything decent?

Can you plug a turntable directly into speakers?
in order to do that you need a turntable with a built-in pre-amp and powered speakers
it's more common to have passive speakers and a turntable that need to be connected through an amplifier/ receiver.
not sure how it is in the uk, but i would recomend buying a used turntable, i have a technics direct drive, that despite being basically the bottom of the line model in 1981 has never needed repairs other than changing the cartridge. they're workhorses and sound good enough, imo. audiophiles will tell you belt driven turntables sound better.

for four hundred pounds you can get a really good turntable, but you also need a receiver and probably a preamp/phono stage

the classic system is source / amp / speakers.

the turntable will be your source. £220 will get you a Pro-Ject turntable which is well regarded (and one of the 'audiophile' turntables mizzell mentions, rather than a more dj turntable like the technics. bit more delicate.). something like this: http://www.richersounds.com/product/turntables/project/essential-2/proj-essential-2-blk (the cheaper, shaped Pro-Jects don't appear to come with lids, which annoys me)

and if you use the same site and click on Amplifiers, and filter on "Phono Stage" at the bottom there then there's a list of amps that you can plug your new turntable into (without a phono stage you'll need a separate pre-amp because a turntable doesn't produce line-level signals like a cd player or tuner does). the denon (£130) or marantz (£150) look like bargains and these things will last forever.

http://www.richersounds.com/products/hi-fi-separates/separates/amplifiers-receivers#1

what speakers do you have? a new system may expose flaws in cheap old speakers.

(am sure there's another thread for this stuff btw)

here: Turntable recommendation required herein

reading that you'll see that the pro-ject is an uncontroversial choice...

Thanks for all this help! I don't have speakers either... I guess realistically I'm looking at closer to £600 for everything.

I live in a tiny flat, so I don't need things to get very loud. The truth is I have a Vestax Handytrax and it's plenty loud, but a new cartridge is about £30 and the whole thing cost just about £150, so I figured maybe it was time to just upgrade. Also on another site someone said it could be damaging my records, though they still sound okay to me.

Seems like there's a huge gap in the market for something that's a couple hundred bucks all-in and sounds decent!

I live in a tiny flat, so I don't need things to get very loud.

get some good headphones.

seriously.

obvious i know, but they make a massive difference.

i have some very cheap basic sony headphones, and i seriously cannot wait to upgrade them.

If you get a turntable with a line-level output/built-in preamp, you can buy some speakers and a mini amp like the Lepai LP-2020A+ (cheap on Amazon). The Audio-Technica LP120 seems to be decently made, though you might want to switch the cartridge out, or try the Pro-ject or whatever.

You may want to know that it is a bit annoying to change speeds on those budjet Pro-ject-esque turntables. I bought an old Technics SL-1600 mk2 for $200 and and I love it. You will then pay another $100 or so for a new cartridge, though.

Aww man now I want to play Spyro.

From Turntable Recommendations II, the one linked by Tom Waits for no one plays through computer (which can rec CD-Rs from vinyl thusly), and good price, good accessories. The Denon linked by Areo looks good, but more expensive:

a friend rec'd me this and it looks like exactly what i was looking for fwiw
http://www.lpgear.com/product/ATLP60.html

― Tom Waits for no one (outdoor_miner), Friday, April 25, 2014 12:15 PM (4 months ago) Bookmark Flag Post Permalink
4 months pass...

Anybody have any opinions about Denon turntables?

http://www.needledoctor.com/Denon-DP300F-with-2M-Red-Package?sc=2&category=1143

― Now I Am Become Dracula (underrated aerosmith bootlegs I have owned), Friday, September 19, 2014 8:49 AM (Yesterday) Bookmark Flag Post Permalink

I started out with the really cheap Denon with a p mount cart and I didn't really like it, but the DP300F looks cool. It has antiskate, but it looks like there's no way to adjust VTA (which you can get with a cheap used Technics).

http://cdn.shopify.com/s/files/1/0105/4542/products/handy1_large.jpg

Is there anyone out there making a battery-powered/USB turntable similar to the Vestax Handy Trax? Sadly, they're out of business and the eBay prices are climbing.

There's the Numark PT01USB. I think it has the same (regrettably heavy-tracking) cartridge as the Vestax but it's a bit bulkier. Single built in speaker.

There's also a Sylvania ripoff of the classic Sound Burger portable that goes for like $30-35 on Amazon and is apparently USB equipped, lots of "works great after I tinkered with it" reviews though.

Anyone know where to buy stereo equipment in NYC? I used to buy my stuff at J&R on Park Row but its closed. Thanks for any help!

A replacement stylus for the Shure M97XE used to be available for ~$50 on amazon. Does anyone know what happened? Might as well buy a new cart I guess.

Yeah, I bought a couple of the N97XE from Amazon like 5 years ago for $49 a pop. Not sure why they're up to $90 now. A bunch of places still have it listed in the $45-$50 range, but who knows if they're in stock or not.

Was poking around today trying to figure out what the deal was, wondering if Shure is discontinuing the M97XE.

Just FYI that cartridge has non-Shure aftermarket styli available, the Pfanstiehl number is 4771 or 771; you can get them for $21 and under at

http://www.thevoiceofmusic.com/

Not familiar with Shure, but Ortofon 2M Red cartridge is great value for money - you can upgrade to the 2M Blue needle if you wear out the red one

Shure still has the full cartridge listed on their site, but not the replacement stylus. A buddy of mine works at Shure HQ; I'll see if he can find out what's up.

I have an Ortofon currently
But I have a huge love for Denon cartridges...
Grado makes some good affordable carts

thanks, all. I'm going to buy an aftermarket stylus and maybe one of the more affordable sources of the Shure part will restock in the meantime. Or maybe I'll be fine with the aftermarket part. I may look at some other carts, as well, just because it's fun. The ortofon 2m Red replacement stylus is ~%80 of the cart cost as well. I wonder if one does better buying an expensive stylus and replacing less frequently vs. buying an aftermarket stylus and replacing more frequently.

I'm having trouble getting my Stanton T.92 with new aftermarket stylus sounding good myself (it sounds awful right now, and I THINK I have everything set up properly?), but it's frustrating because it's pretty hard for me to isolate where the issue lies. I'm not a gear guy really.

do you have the correct tracking weight for your aftermarket stylus? I noticed that it can be different than that recommended for the cart manufacturer's stylus.

Oh good call. I hadn't considered that. Not too sure how to figure that out though- trial and error perhaps?

the website GPIIH linked to helpfully shows tracking weights for aftermarket styli if you remember which one you have.

Thanks, hopefully it will clear things up. It perks me up to consider that I won't necessarily have to roll the dice on yet another stylus and hope it fares better.