How do you 'normally' shoot and process (and organise, if you like) your photos, etc?

what does it do?

It's a dodge and burn tool - you paint an area and change any of clarity/sharpness/brightness/contrast/exposure or even colour.

A rough and ready example - without adjustment:
http://farm5.static.flickr.com/4001/4189045016_a2da7f5a5f_m.jpg

Face/hat/body with brightness/contrast/clarity adjustments:
http://farm5.static.flickr.com/4001/4274688037_2b1c513412_m.jpg

Whoops - wrong way round! The one at the top has the local adjustments.

duuuuude

ruinin my productivity over here

Here's a more extreme example, within the realm of vanity...

Without:
http://farm3.static.flickr.com/2683/4275452314_b6f8f5b689.jpg

With:
http://farm4.static.flickr.com/3662/3379937991_a3396ec6ff.jpg

There's less need in general for dodging and burning with digital than with film.

In large format, you could vary exposure and development to ensure the full range of potential tones make it into the negative/print. (aka The Zone System - but I think most people who use that are aspies)
Shooting large amounts of 35mm, you'd have exposures that were off, or hot points within a single frame, or whatever - and you had to work extra hard in the darkroom to get even a usable image, much less an artistic one. I had one image that was taken in the tunnel of a baseball stadium, and so the amount of light between the end of the tunnel (where the action was) and the tunnel itself was massive. I had to burn in one section for two minutes, IIRC.

With histograms and gradients and such, it's hard not to get a RAW image looking decent with a minimum of labor (at the expense of making all your images look flat if you go overboard or don't think about your choices, obv).

in case you missed it on the ILE photoshop thread:

http://blogs.adobe.com/jnack/2010/03/caf_in_ps.html

demo video of the new 'content aware' feature in upcoming photoshop.. it looks kind of amazing

deleting the road and replacing with desert is sort of terrifying

it's going to get a lot harder to tell from some of the pixels

Wait until they can do this with human faces. Like, not just cloning in crowd scenes, but plausible imaginary people.

i thought you meant like, eradicating the features of people's faces. which is totally how i would spend twilight hours using this software.

That would be pretty cool too but I have this nightmarish idea that, for CS6, Adobe are building an online database of passport images of dead people that a PS user can access with a "fill human content" option.

Soon Photoshop will already know what everything looks like without you having to take a picture.

online database of passport images of dead people

you're just throwing away awesome sounding new technologies here

adobe photoshop cs6ixth sense

doesn't gimp already do content aware stuff?

Does anyone here use DxO Optics Pro? Downloaded a trial version last night (the FilmPack too, but I haven't tried that yet) and it's pretty extraordinary. Certainly shows up the non-flatness of my 28mm; kinda makes me want to stick with the 50mm for single-subject portraits for a while! If would probably slow me down to the point of never putting another image on Flickr, but it is tempting to build DxO into the workflow - particularly for wide-angle stuff which has obvious distortions.

Nick: did you take those 15mm fisheye shots in Raw by any chance? If so, could you send me one so I could have a play with it on DxO? (Although it's supposed to work on JPGs too, it doesn't seem to be able to correct lens anomalies unless you give it the Raw).

I use PTLens which is similar

The main thing that struck me about it was, seeing that DxO have gone to the trouble of building profiles for most DSLR/lens combinations out there - is it such a necessity for pros to have L-grade (or whatever Nikon's equivalent is) lenses? When you can take a pic with a mid-price prime and then eliminate all CA, sharpen all the way to corners, wipe out distortion, improve contrast, etc? With just a single click too.

yeah it is pretty amazing tech - I'm glad lens correction is built into the m43 standard so they can build smaller lenses overall

if they continue cramming pixels into these sensors though you'll probably still need high quality lenses just to match the resolving power of the sensors :/

more talk about processing please! returning to aperture after about half a year off and I've forgotten everything ;_;

for some reason shooting in raw means i no longer need to do the usual exposure and contrast/curve tweaks that i used to. not as much, anyway.

We seem to be discussing it in two different threads at the mo'! Perhaps bring all the PTLens/DxO chatter into here?
xp

feel free! also a nice, short video on the advantages of curves:

http://www.vimeo.com/10111531

I suspect I've been missing a trick or two with the Tone Curve in LR2.x, reading Milo Z's comment upthread and judging by some of the wacky shapes I see in some of my presets. Definitely seems easier to manipulate in a PS CS2+ style in LR3, but perhaps I never figured out how to do that with LR2. I'm generally pretty happy with a little S-curve and using the histogram sliders for everything else.

If they could incorporate specific lens distortion algorithms (a la DxO Optics Pro) in LR3 then I'd definitely be in. It's only maths, innit?

― Michael Jones, Wednesday, 31 March 2010 09:03 (5 hours ago) Bookmark Suggest Ban Permalink

lens correction is already built into camera raw - if your camera has the right EXIF info (i.e. you're shooting a micro 43ds, LX3, or S90) it'll apply the correction automatically. of course you may want to do more than the manufacturer has dialed in (to remove excess CA etc.)

― ain't no thang but a chicken ㅋ (dyao), Wednesday, 31 March 2010 10:45 (4 hours ago) Bookmark Suggest Ban Permalink

Hmm, I guess the lens correction I'm limited to with ACR (with my Canon EF lenses) is just vignetting/CA (which is all there in the LR interface). Judging by the profound effect I see when applying the 40D+28/1.8 DxO module to images taken with that combo (and these are tiffs exported directly into DxO from the imported LR Raw), there's clearly no barrel distortion fixing going on with ACR.

I should experiment a bit more though. This is based on an hour last night...

― Michael Jones, Wednesday, 31 March 2010 11:48 (2 hours ago) Bookmark Suggest Ban Permalink

PS already has a lens correction tool I think, but it's pretty basic and not calibrated for individual lenses - it would be nice if Adobe incorporated it, but I don't see it happening...

as each lens has its own distortion characteristics, you need to specify how much correction to dial in for each particular lens, and if it's a zoom, at each particular focal length. so it's easy to do for a prime, but for a standard 24-70, you'll have up to 46 different possible distortion characteristics which you need to compensate for..

you should also give PTLens a try - much cheaper and does the same thing

― ain't no thang but a chicken ㅋ (dyao), Wednesday, 31 March 2010 12:20 (2 hours ago) Bookmark Suggest Ban Permalink

Yes, that seems pretty good. As fun as the FilmPack stuff is with DxO, I have no real use for much else that it does, as it duplicates a lot of Lightroom functionality. The one-click appeal of DxO is rather lost when you find it doing something you don't actually like (the auto noise reduction is not as subtle as LR, I don't think; though you can customise so it limits what it does in Auto mode) and then you have to start going through drop-down menus.

Also, it's not ideal calling external editors from within LR on images you may have already processed in LR; not only do you lose the changes in the export (OK, not with PS or PSE), what you get back is a TIFF or a JPG, so that copying the original LR adjustments over gives you something wildly different. It's tricky working out what the correct workflow would be with something like DxO; either you have to do everything in DxO or just accept that the nicely flat, sharp image you get back in can't be manipulated with quite as much freedom.

― Michael Jones, Wednesday, 31 March 2010 13:45 (1 hour ago) Bookmark Suggest Ban Permalink

That's from the point at which we stopped talking specifically about LR3 (and I've employed a bit of Stalinist revisionism by deleting my sarky comments to gbx).

Hello, me again :)

I've just downloaded the trial version of Lightroom and now I know why MJ's pics look so much better than mine! But can I use it to add borders?

There's a plugin for that!

On the subject of Lightroom, what do people generally do with their metadata? Just leave it in the LR catalogue? Write it out to the raw or JPEG files for certain photos? Automatically create an XMP sidecar for every edit?

I did a transatlantic LR collaboration on some artwork recently and that was my introduction to the notion of exporting metadata as an XMP sidecar. Very handy. I could imagine it slowing things down a lot if you just left it on by default though? (I was prompted to think about this today at work, where, as a security measure, all USB memory sticks are going to banned shortly; I thought I better grab all the CR2/XMP files I can from personal stuff I've processed here in LR2.1 and LR3b2 while I still can).

looks like Adobe is making a play into DxO/ptlens's territory:

Adobe releases Lens Profile Creator
Adobe has posted a prerelease version of its Lens Profile Creator utility that enables creation of custom lens profiles for Photoshop CS5, ACR 6.1 and Lightroom 3. The process involves downloading and printing a checkerboard test chart from Adobe Labs, and shooting a series of RAW or non-RAW images. These can then be imported to the Lens Profile Creator to generate custom profiles for the Lens Correction feature in Photoshop CS5 and Lightroom 3. Furthermore, these profiles can also be shared via the company's user community. (12:24 GMT)

Jonesy; only just catching up with stuff after a busy couple of weeks. Only have those pictures in Jpeg, sadly; I'll take some RAW fish-eyes just for you, though!

Ah, too late now - my DxO trial has finished! Don't know whether I can download another trial...

Let me know if you can...

was kicking around an idea where we could have a post processing 'interpretation' thread where we all pass around one of our files and see how others on this board post-process it... any interest?

that would be fun! esp since I can't make pictures :(

count me in!

Good idea!

i'm in!

+1

alriiight going to have a busy one and a half weeks so look for a start date of around the start of July

idea/q: can google docs share RAW files? or could we just use hi def jpegs on someones Flickr? or create a dedicated Flickr that seeds starter files?

yah I think you can upload to google docs. or e-mail to a ILP gmail account and give everybody the password.

thanks for reminding me of this! I will write up the details tonight or tomorrow

yay

Wow, I can't believe I never knew about this board.

I usually process my images using lightroom, find a shot I like from the shoot, crop it, adjust the colour temp, contrast etc etc. Make a preset, batch process all the shots using the preset, then take the best ones into photoshop to retouch.

guys what is bridge for anyway

just to slow things down when you're almost done

i realized the other day that my LR library is woefully disorganized and i'm sort of determined to cut it down to size and get ride of a bunch of junk

do y'all generally just keep every single thing you shoot, or are you pretty ruthless. bear in mind that since i'm just shooting for fun, i don't feel the need to keep several versions of the same shot. three similar shots, one is better than the others imo? GONE

my lightroom s/n might not have been the world's most authentic, and now it's bust. Damnation. Over to Aperture it is.

william eggleston claims that he never shoots the same thing twice to remove the need for that doubt in the first place

Yeah I'm now trying to get myself to take a bunch of different shots rather than trying to get that one shot perfect (which I'm not great at anyway)

I do the reverse curl and keep em in a canister for a day or two

i got a few sets of prints & a few sets of negatives back from the lab today, & they all came in the same envelope; those that were on the outside are curled, my god it is terrible; i've been trying to scan them by slamming the scanner lid down like a malcontent pianist. i'm trying to just get some reference scans so i can pick a few things to get printed, so i'm not even starting to worry about colours (bluish) or tones on the b/w stuff (blown out). this is basically my terrifying entrance to the world of negative scanning, the idea i am now the guy responsible for all of this process-ing is p harrowing.

reverse curl tip much appreciated btw

the more gentle way is to sleeve them and put them in between two giant pieces of lead granite

yeah. they're sleeved (the complicated folding of which feels like part of the cause/effect thing) & i'll find something to put them in between (currently, for the transport home: in the new & conveniently scaled charles burns book). it really feels like a whole other thing to be dealing with the delicacy of negatives, anyway. like i want to buy gloves; i feel so klutzy when i have the instinct to paw away dust. are you guys all like antiquers, with glasses perched on the edge of your nose & airbrushes within reach on your solid pine desks & mickey mouse gloves worn as soon as one enters the controlled environs in which photo handling takes place?

I don't wear gloves I handle them by the sprocket holes

You also have to be sure your monitor is adjusted properly. The differences you state, sound like light-temperature variances from location to location.

Once you learn the temperature of natural light (or even flash pics which most flashes correct for temperature variances), then it'll be easier for you to correct them.

If you have no idea what I mean by "temperature of light", then I can't help you any further.

cool new photo rabbit-holes to go down

looking at filmstrips is really awesome btw

https://lh4.googleusercontent.com/-vTpsx3Bpv8k/UMmT5pY0pOI/AAAAAAAAAMc/fBRfklMt8gk/s912/2.jpg

Sandy destroyed my favorite photo developer (at least I doubt he'll be coming back) so I tried a new $3/roll place and they just *wrecked* my negatives. they came back unsleeved in a cardboard box and the chemicals must have been waaay off because the negs are super faint.
good thing I'm on a scanning hiatus atm

also reverse curl is all you need. the day I get negatives back they can be hard to scan, but within a couple days they generally lie pretty flat.

it sucks trying to find a quality developer in my ridiculous price range!

there's a place near me in Chinatown off of Bowery that does develop only for 3.75, haven't tried them yet tho

http://www.yelp.com/biz/yardley-photo-studio-new-york#query:photo

this is the place? what's kinda funny is that when I was going through my parents negs from the 80s I'm pretty sure they got some of them developed at the exact same place

they also do 120 and 220 for relatively cheap too

nb: don't know how the quality is

hmm, might have to give it a shot. I saw a place on Mulberry, next to Columbus park that I might have to try also.
it's tough though, you really have no idea how well a place will do until you get the results back.
my disappointing rolls came from the place at Lafayette and Walker fyi

i totally have enough ~concerns~ & #feelings about negative scanning to start a Help Schlump Scan thread, but i just wanted to ask a really general question to help me figure out the initial fumbling i'm doing. i've been scanning a little with my v500, am working through a couple of rolls of superia, & it's really interesting, just seeing how ""naturally"" dark & light some images are, & how malleable they & their colours are from the point they're on screen. something i think i only just realised is that part of what's significant about colours in a photograph isn't necessarily just tones, but the relationship of tones - & so adjusting all of them at the same time can preserve some of the relationships & i guess moods of the palette, or i guess isolating or adjusting one band of colour could change the dynamic.

anyway: to anyone who scans, what do you do wrt the 'passes' function, or the option to multiply expose? it seemed so smart to me, the idea that repeat scans & a combined image would limit the effect of deficiencies of the scan, but in reality i've kinda just ended up with some blurry or grainy images. it's weird. scanning is going okay but i'm still wrestling with it, & trying out different settings to limit weirdly upfront grain:

https://lh5.googleusercontent.com/-4wylsfa_wFs/UN1TqsjN2EI/AAAAAAAAAbs/69jdrlij3xA/s700/1538.jpg

I don't bother with multiple passes, because it adds soooo much time, and provides only a marginal improvement when I can even notice one.

ha, thank you. i had got into a rhhythm of starting scanning & then going to do the washing up or something, now scanning quickly is winning out. i'm trying the multiple exposure thing at the moment (it's one ... bright scan & one dim scan, or something), it's going okay. the noise is eventually soothing.

advice on scanning polaroids? they look deep and interestingly colored to my eyes but the scans look washed out and boring unless saturation is cranked up and then they look okay but not as appealing as the original.

looking forward to your replies,
dylan

dylannn - forgive me if this seems obvious but it sounds like the issue might be flatness more than desaturation? maybe bump contrast just a bit and/or futz with darkening the darks and lightening the lights specifically? i've been shifting to using lightroom for futzing with scanned prints (family photos) as much as for working with RAW files and the same toolkit translates very well ime. little s-curve, little vibrance, gets closer maybe. but i honestly haven't fucked with polaroid much at all and am eager to rescan the very few i do have on flickr that were done terribly ten years ago.