noob questions

Opinions sought on my n00b idea of changing my compact chainset from 50-34 to 46-34. Just don't use the high gears that much and when cruising always find i wanted to cross the chain massively.

What's your cog range? I'd look at expanding that first.

Also -> ride faster.

more detail on expanding cog range plz. does that mean new rear cassette? will it fix chain crossing problem?

pretty happy with my leisurely sunday rider stance tbh.

I don't understand why you have a chain crossing problem! Is your derailleur bent or something?

nah, i just normally find myself on the middle/low end of the cassette when on the big front ring? idk maybe my indexing is a bit iffy as well. maybe i take it too easy. idk.

Chain crossing should really be an issue you may want to trim your from derailleur a little.This varieties from system to system how it is achieved and from brand to brand how much is necessary. SRAM is notorious for needing lots of trimming (apparently fixed in new Red)

As far as rear cogs go you can mess around to have lower gears come sooner in the range. This is SRAMs range, if you move from an 11-26 to an 11-32 then you'll hit the lower gears a cog sooner. Move to a 12-26 and you get the higher gears a cog sooner but the low gears stay the same.

11-23: 11-12-13-14-15-16 -17-19-21-23,
11-26: 11-12-13-14-15-17-19-21-23 -26,
11-28: 11-12-13-14-15-17-19-22-25-28,
11-32: 11-12-13-15-17-19-22-25-28-32,
12-25: 12-13-14-15-16-17-19-21-23-25,
12-26: 12-13-14-15-16-17-19-21-23-26,
12-27: 12-13-14-15-16-17-19-21-24-27,
12-28: 12-13-14-15-16-17-19-22-25-28,
12-32: 12-13-14-15-17-19-22-25-28-32

interestin'. doing another ride this sunday, will try and clarify the problem more accurately and figure something out from there.

just saw this on craigslist, this is like beyond 'noob' territory going into 'what on earth are u thinking':

http://oi43.tinypic.com/2j0nihj.jpg

http://www.bocyc.eu/gallery/big/bocyc_05-quatro.jpg

^^ savages

wait are we talking abt handlebars?

the *dropped* handlebars?

If we want to talk savages

http://3.bp.blogspot.com/-qb8QktenUts/T41xMv9GE4I/AAAAAAAAaS4/lGpxg8lxiL0/s1600/scott.jpeg

courtesy of bikesnob

http://delaware.craigslist.org/bik/2947323490.html

idgi

i bet the guys at the bike shop LOVED this dude.

xp stevie, this is the cycling equivalent a post selling a gourmet meal with lines like "i had the chef pour heinz ketchup all over it for better flavor"

someone in delaware is trolling, and doing it well

wait are we talking abt handlebars?

― Time, a group with Jam and Lewis (Stevie D(eux)), Saturday, April 21, 2012 9:54 PM

the *dropped* handlebars?

― Time, a group with Jam and Lewis (Stevie D(eux)), Saturday, April 21, 2012 9:54 PM

we're taling about the dropped handlebars that are flipped upside down. and in the case of the first one upside down AND the stem and handlebars are BACKWARDS

courtesy of bikesnob

http://delaware.craigslist.org/bik/2947323490.html

― American Fear of Pranksterism (Ed), Saturday, April 21, 2012 10:02 PM

haha i <3 craigslist. and bikesnob.

And the shop adapted a kickstand to fit the carbon fiber frame

had me LOLing at "replaced handlebars for better control"

that thing is already somewhat infamous

http://thedailygrind.robdamanii.com/2012/04/11/facepalm-files-the-sad-scott/

whoops didn't see it was on bikesnob that explains the infamy

is that really sadder than a full race trim scott creaking under a 220 pound lawyer on some charity ride

lol

http://baltimore.craigslist.org/bik/2967945092.html

is that price a typo or

USE BIKE MURRAY TOURIN MTN BIKE FRONT SUSPENSION SYSTEMS just need clean up it ...

Hey does anyone have any general tips for looking for second hand steel road bikes?
This is the kind of thing I am looking at. Is there anything I should be looking out for apart from general fit and feel?

In addition to looking at the components, it's worth googling the tubing, I think, you can get an idea of how good the bike was in a particular year. Not all steel is equal even under similar paint jobs. You can cut through a lot of the bullshit surrounding the brand and it being 'vintage' and the like.

So looking up "Columbus Aelle" gives me

http://www.equusbicycle.com/bike/columbus/columbuschart.htm

It's at the bottom end of the columbus range, largely un butted. The ride will be comfortable to the point of being squishy. €420 seems pretty high price for something that started life as a budget racer.

VdG, are you in London and might you be interested in an 80s Holdsworth tourer to fit approx 6 footer? Needs a clean and a service but it was fully functional 5 years ago and has been in a shed ever since.

Mine's a mid-level Reynolds 531 10-speed tourer in (dirty, scratched) white. Needs a lot of tlc but is mechanically in decent nick.

Naa I'm in Germany

Thanks ed, I'll try and inform myself about frames a bit.

http://www.nytimes.com/2012/07/18/world/europe/in-denmark-pedaling-to-work-on-a-superhighway.html

"The plan has received widespread support in a country whose left- and right-leaning lawmakers both regularly bike to work (albeit on slightly different models of bicycle)."

what are the "slightly different models" here? anyone know?

http://i955.photobucket.com/albums/ae31/Foxx-Dot-Com/4chan/1254517783743.jpg

loool

Massive noob question here - please don't laugh. I currently have a mountain bike/ATB which I mainly use for road cycling to and from work on a fairly flat road. I'm constantly getting overtaken by racers (and even Bromptons) as my fat-arsed tyres drag themselves along the road. I'm thinking of getting skinnier tyres with a smoother tread. Can I simply change the tyres or will I need to do more than that (e.g. change the wheels themselves or something like that?). Recommendations are also very helpful!

yes you can simply change the tyres. check the diameter of your current tyres but they'll almost certainly be 26". can't recommend anything in particular but try these links:
http://www.chainreactioncycles.com/Categories.aspx?CategoryID=740
http://www.wiggle.co.uk/cycle/mtb-slick-tyres/

thanks ledge. yeah i'm certain they're 26"

the tire wall should have the size written on it, e.g. 26x2 (26" diam, 2" wide). what width do you currently have?

not near my bike right now. i'll check though.

if in doubt go to the bike shop and tell them you want to change to slicks. they'll sell you ones that will fit.

I never learned to ride, I want to now. Just recreation on city streets and parks, pretty flat, $500-$600 budget (want to buy new so the shop can make appropriate adjustments, etc.).

Is there a suitable Trek? I read about the Felt Glassell and that sounded interesting too.

Also Kind of interested in a three-wheel recumbent tbh.

dl, more than you would ever need to know about rim and tyre widths (with a handy chart near the end under 'width considerations':

http://sheldonbrown.com/tire-sizing.html#width

on the three wheel recumbent, depends how you're using it. they have a very wide stance, which makes maneuvering anywhere around traffic hard. also, they are very low and i've been told, therefore more likely to be hit by cars, thus the common use of flags for recumbents. my general attitude is, if you need a recumbent to get on a bike, go for it, but if you don't, skip it.

hay hay i got some slicks. only had time to change the front one and it seems good. problem is, the front wheel quick release axle kind of fell apart while i was taking it off. i put it back together best i could, but i had to guess how because nowhere on the internets could i find anything that told me e.g. washer, washer, spring, fork, fork, spring, nut (think that's the order i put em on). so i hope i haven't bollocksed it up. back tyre this weekend. uh ohs...

DL - you might be better off going to a bike shop and getting them to check your quick release, you really don't want your wheel to fall out while you're riding.

quite right indeed.

dunno about that, it ain't rocket science

http://www.montaguebikes.com/assets/images/ownermanual/standard-labeled-quick-release.jpg

that's what i need! thanks ledge, you're a ledge!

ha

except the drawing's missing two washers there. never mind, i'm sure i got it right by looking at the back wheel.