Pedal geeks i need u (help jjjusten make decisions about awesome pedals for his store)

normally stuff priced that far above parity sets off every bullshit meter i have but man, i got a sample and they are really something. tech is totally legit, switch life should be just about infinite, literally ZERO bleed from side to side. hope im not the only dude that gives a shit about that sort of stuff.

Also have some pretty dope pedals on special buy this week. Batteries included.

https://www.aldi.com.au/en/special-buys/saturday-08-march-2014/saturday-detail-wk10/ps/p/guitar-effects-pedals/

hahaha

https://scontent-b.xx.fbcdn.net/hphotos-prn2/t1.0-9/1920267_10152267178838917_2116111836_n.jpg

https://www.youtube.com/watch?v=CyXcBpg20Ls#t=46

so many new pedal lines, so many awesome new vintage weirdo things

now doing tc electronics, about to add old school effects, talks in process on greenhouse, wren and cuff, dr. scientist, dr. no, cusack, mojo hand.

also just took in an ibanez ot-10 octave and HOLY SHIT now i get why people freak out about these things, its the bastard son of the pearl octaver mixed with a vintage EH microsynth. its going to be really really hard not to buy this for myself.

oh yeah and also just got in a v3 mosrite fuzzrite. and a malekko lofi 616 mkii. and a first year SIB mr echo. at some point i am just going to have to just convert fully to being a pedal only shop if this keeps up.

jjj i am very curious about that new TC delay. any experience?

The flashback or the flashback x4? Either way, it's going to be about a week before they appear

um... sorry... i was thinking of a different new release that starts with t

http://static.squarespace.com/static/5241856be4b07f248a5a2804/52f4cfc4e4b05d1230beec45/52f4d095e4b08f72cd95023d/1391775893941/ReplayBox-RIGHT.jpg?format=1000w

in my defense i'm recovering from surgery and so i'll just blame the meds. carry on :(

I will totally pimp for Mojo Hand though. Brad is a great dude and he's on a real tear lately. I really dig the 442/443 analog filter and (oh the shame) the new dumbl. Haven't tried the Rook or the Iron Bell but they are well loved on the boards and should be solid bread and butter sellers.

Also, have you looked into these guys at all? Think you would dig how Philippe rolls: http://carolineguitar.com

what's a good volume pedal? the ernie ball ones seem to be the standard but they're a bit expensive for what seems a fairly simple task, all i want to do is smoothly orient my way around all volumes from 0 to 100 is it so much to ask.

I am weird and picky about volume pedals so I am probably the wrong guy to ask, but I like the Big Joe Volume (although largely because of the 3 mode and adjustable sweep shit that you don't need). The Fender volume pedal (now discontinued) was great too if space is not a concern. Are you looking at the ernie ball jrs, or the full size ones? Jrs are much cheaper, and although slightly more expensive than the dunlop crybaby chassis ones, much better imo. Anything less is going to be a plastic housing and pretty mediocre, honestly.

Also Caroline would be high on my list but I think they already have a dealer in town and I don't want to step on anyone's toes.

thanks, that's useful. i suspect it's something i'd find myself being picky about too so i wouldn't want to go budget and end up with a pedal that has annoying limitations. fender seem to have a new one on the market - http://www.gear4music.com/Guitar-and-Bass/Fender-FVP-1-Volume-Pedal/X3M - know anything about it?

might also be worth looking at that crazy electro harmonix volume pedal, the one with no moving parts, ive heard good things

this tc electronic flashback x4 is crazy crazy good, like a hugely improved line 6 dl4 or a strymon that doesnt cost 10 billion dollars. at $249 it's absolutely amazing. HUGE though, basically the same footprint as the dl4

I've recently acquired a CS-3 Compressor/Sustainer and an NS-2 Noise Reducer. How can I get the best out of these?
I take it I would have something like Wah > CS-3 > Distortion > NS-2 > Delay ? But are there any nice setting combos for these?

Hello again. Can someone give me a bit of a primer on pedal boards?

I've recently acquired a number of new pedals and I'm getting fed up of having to set them all up each time I want to practice. I don't really know a lot about pedal boards, how they work, which ones are best to get, how to accommodate a number of pedals and what to look out for.

Currently I have a Diageo power supply and daisy chain (which weren't cheap) but it only accommodates about 6 pedals. I take it it's not safe to use a double daisy chain. If I get a powered board, will I even need to use the supply any more?

its totally safe to continue daisy chaining, as long as you have a power supply with enough milliamps to do it. figure that a 1600 mA supply can probably easily handle 8 pedals without any sweat. diago makes one thats 1000 mA and one that's 3000 mA iirc. any idea which one you have?

also i just picked up their line of pedal boards and i am pretty impressed for the price. i personally hate the limitations of boards with built in supplies and avoid them like the plague.

oh and also you basically want to place the ns-2 right after whatever is creating noise in your chain, so if you are primarily dealing with guitar sourced noise it would go in the front, if the distortion is the culprit, right after that, etc. comps can accentuate noise quite a bit (remove nerd info) so keep that in mind as well.

Cheers jjjusten. So I was looking at the Boss board but if you reckon powered boards are a no no then I might change my mind. I'll take a look at my power supply.

I found out if I put the CS-3 after the majority of my effects it works out a lot better. The distortion pedal was very often playing a lot quieter than the clean guitar which was no good, so I've pretty much got my effects then the compressor, then the NS-2 which I'm not sure is all that orthodox, but what they hey.

Just checked my receipt (I'm at work) and it's a Diago PS10 Micropower9 Pedalboard Power Supply with a PS02 Deluxe Daisy Chain. Not sure what that means for me.

Only 1000ma according to the site, so that's a bit shoot considering I plonked down £25 for it. Oh well.

oops I went crazy and bought an Electro-Harmonix Cathedral reverb on impulse, RIP my bank account.

Heh. I've been really close (mentally) to making a disastrous pedal purchase.

what is it? GO FOR IT. My perhaps sketchy justification is that as I got it fairly cheap on ebay I can always sell it again for around the same price.

I passed up a terribly cheap used pedal that I want on Guitar Center this morning (Earthquaker Depths for $119). But I don't want to support them, so I didn't give in.

What I want to pull the trigger on is some really nice versatile fuzz with a lotta dials but I know I have to put it off until at least mid-summer (for various reasons). Like, even just BUYING IT NOW!/PAYING FOR THE REST OF MY LIFE! on the credit card won't work because I know I have some upcoming household purchases I'm going to have to make. : (

Was gonna say, if it's a Meat Box, DO IT.

PARENTAL
ADVISORY
EXPLICIT
NOISE

Dr. Scientist is a done deal. What an awesome dude.

Also about to get my first shot at the Skreddy Bloody Knuckles as soon as the shipment arrives. Stoked.

For the unfamiliar:

http://skreddypedals.com/skreddy_pedals_bloody_knuckle.htm

And maybe the coolest pedal website in the world:

http://www.drscientist.ca

Oh holy shit, the bloody knuckle is already discontinued. Well, guess I won't be dealing on the price on that one then.

that website kicks major ass.

do not sleep on the not-discontinued skreddy hybrid fuzz driver

Oh trust me, I don't.

Skreddy Lunar Module mini deluxe is mandatory around these parts.

Still pretty confused about pedal boards. They really do vary wildly. I'd build my own but pfff... What does everyone else use?

A piece of wood. They're currently secured with Velcro, but I've found I don't really like that. They tend to flop around and the Velcro itself gets really dirty. Someone (either on here or some other board) recommended securing the pedals to the board using bicycle chain links attached to y the screws on the bottom of the pedals. Been thinking about trying that approach.

http://www.christopherhopper.com/2013/06/jason-rodgers-pedalboard-and-the-bike-chain-link-method/Example

http://www.christopherhopper.com/2013/06/jason-rodgers-pedalboard-and-the-bike-chain-link-method/

With a non-powered board, how are you powering the pedals? My Diago thing only goes up to 6 pedals I think, and I'm planning to get a couple more. I've seen things like the Voodoo Lab Pedal Power +2 but these strike me as expensive and probably for people who are a bit more pro than I am. But I don't want loads of hiss etc...

I just use a OneSpot, but mine is strictly for at-home use.

ah right... i'll be playing local shows and taking it to practice rooms etc.

Nothing wrong with a one spot or similar really. Power bricks often have other voltage options (18v, voltage sag, etc) and sometimes better isolation (although not always, T. Rex has a couple non ISO bricks which is, well, scammy and stupid).

Skreddy Lunar Module mini deluxe is mandatory around these parts.

― Elvis Telecom, Wednesday, April 23, 2014

Same here tbh. Most versatile/addictive fuzz face i've ever played.

Plus Marc from skreddy is literally one of the nicest dudes in the business, so giving him money feels good.

What I want to pull the trigger on is some really nice versatile fuzz with a lotta dials but I know I have to put it off until at least mid-summer (for various reasons). Like, even just BUYING IT NOW!/PAYING FOR THE REST OF MY LIFE! on the credit card won't work because I know I have some upcoming household purchases I'm going to have to make. : (

― keep calm and nahkchivan (how's life), Thursday, April 17, 2014 7:33 PM (6 days ago) Bookmark Flag Post Permalink

Heh, I didn't even last a week either. Found a solidgoldfx Formula 76 (a four-knob Super Fuzz-ish box) for super cheap and lost the will to resist. Anyone have opinions on solidgoldfx?

Still pretty confused about pedal boards. They really do vary wildly. I'd build my own but pfff... What does everyone else use?

I'm building my own from instrumental panel facing I found at an aerospace junkyard.

I'm also thinking about getting a delay pedal (assuming delay is generally more useful than reverb). Is the Boss DD series a good start or are there better options out there? Analogue?