Awesome Audiophile Snake Oil

...hey, has anyone seen those crazybaby ads on youtube?
it's a levitating bluetooth speaker thing!
...i suspect the real audiophiles will sneer, but... the freaking thing levitates! even if it only sounds as good as other $200 bluetooth speakers, that is pretty cool.....

man when your speaker levitates you gotta ask yourself, "how good would this sound if all of that levitation money was put into the crossover!"

plus bluetooth signals sound richer in the lower mids when you hang a (WRINKLY NOT PRISTINE) sheet of 0.08mm robin's egg blue cellophane between the signal source and speaker

obv

goes without saying

Since this seems to be the place where ILM audiophiles hang out, I thought I'd ask this question here:

I bough myself a Fiio E07K DAC/headphone amplifier, and I wonder if anyone's had problems with getting the sound to it from the computer via USB? It's supposed to plug-n-play, i.e. once you plug it to the USB port, it will automatically work as DAC, and it works exactly like that on my work laptop, everything was fine with that. But with my tabletop computer, I can't get the signal to travel to it via the USB cable, so I have to plug the analog cable to the headphones plug in the computer.

I can't figure out what's wrong: the E07K shows normally on the device list, the driver software is up to date, everything seems to be correct. But when I go to the Windows sound mixer settings and try to change the sound device from the internal speakers to the E07K, I get an error message, even though the mixer shows E07K on the list of devices I can choose from. Also, while the E07K shows on the list of available audio devices, I can't change it to the default device; the option to make it the default device is there, but even if click, the it internal speakers still remain the default. I've tried everything, updating drivers, disabling the speakers so the E07K is the only sound device that's abled, but nothing helps. The laptop has Windows 7 and the tabletop has Windows 8.1, so I wonder if this problem is somehow related to 8.1?

See if it works on another computer.

As I mentioned in the post, it works just as it should on my work laptop.

Though I guess I should try to find someone who has Windows 8.1 (since my work computer has Windows 7) to see if it works on their computer...

try this:

https://www.youtube.com/watch?v=yLSDQ_Zh0zI

oh god, drivers

I tried what the video did, but the Fiio driver was already up to date, so it was no use. I really don't understand what's wrong: the driver's been installed, my computer recognizes Fiio, it's listed in the Device Manager under audio inputs and outputs, and when I go to the sound mixer, it allows me choose between the speakers (Realtek High Definition Audio) and Fiio (SPDIF OUT), but when I choose the latter, I get an error message saying "No audio device is installed". It's mystifying.

1. See if the system has USB drivers that need updated, like for the motherboard or w/e
2. Try a USB hub
3. Try all the diff USB ports

Did you try input with just the 3.5mm jack? If it works via jack, it could indicate USB or bus drivers (c'mon Windows, get it together already!)

Maybe try un-installing device drivers, reboot, and start fresh.

Yeah, the 3.5mm jack works fine, and like I said, the DAC works perfectly on my laptop via its USB port... So the problem is must be in the tabletop computer. And I've tried plugging the Fiio to every USB port in the tabletop (it has both USB 3.0 and USB 2.0 ports), that doesn't solve the problem.

I guess I could try to update the USB drivers, but I'm not sure where to start with that... Is there some centralized way to check if all the drivers are up to date?

Google has plenty of results for "Windows 8 driver Fiio Eo7K".

Couple people on a headphone forum I look at occasionally fixed issues with Windows 8 and a Fiio by calling up the command line prompt and typing:

sfc /scannow

It repairs problems on the boot drive. Though the problem they were having was Windows crashing when the Fiio was plugged in, not your problem. Still sounds like it was some sort of USB issue that was getting fixed.

Yeah, it'd be worth looking at the system event log to see if something is crashing

tl;dr buy a mac, right

just don't use computers, they're awful

can't argue

Record player are the best DAC of all

but then you get into the argument of what the best phono preamp is :)

a record player does a very poor job of converting digital signals into analog signals imo

*puts tim hecker cd on record player*
*drops needle*

no, seems to be working fine

LOL

Equipment Analog Music Clearance Brands Quick Find
Soundbytes Specials > Winter Clearance > AUDIOQUEST
AudioQuest_-_Columbia_Interconnects_(Pr)"
[Click here to view larger image]

AudioQuest - Columbia Interconnects (Pr)
Price: $420.00
Now: $249.00
Quantity:

This product can only be shipped to US addresses.
Brand: AUDIOQUEST
Category: Audio Equipment, Cables, Audio Interconnects, Soundbytes Specials, Audiophile Gifts Under $500, Best-Selling Cables, Winter Clearance.
SKU: AAQCLM05MRCA
Availability: Ships Today*
* All specified ship dates are estimates
Share on facebookShare on twitter
Share on emailShare on printMore Sharing Services
Full Description

60-Day Guarantee
AudioQuest Columbia Interconnects
Unsurpassed Performance for the Price: AudioQuest Columbia Interconnects Include the Award-Winning DBS System, Finest PSC+ Copper, and Upgraded Connectors
Get 40% Off AudioQuest Columbia Interconnects and Hear Music With Smooth Frequency Response, Blacker Backgrounds, and Wonderful Transparency

Fantastically neutral, highly resolving, wonderfully transparent: AudioQuest Columbia interconnects remain a go-to favorite for audiophiles, and for very good reason, not the least of which is the real-world price. To start, Columbia uses AudioQuests’s top-grade solid copper conductors – Perfect-Surface Copper+ – and adds an additional layer to the Noise-Dissipation System found in the company’s renowned Diamondback and King Cobra models. In addition, Columbia employs AQ’s patented Dielectric-Bias System to dramatically lower the noise floor and smooth frequency response. Plus, upgraded connectors (see picture) offering a much more sophisticated and sonically taut design than the competition further enhance musicality. The end result is a spectacular cable that grants music blacker backgrounds, improved nuance and texture, and greater dynamic contrasts. High-end design and performance at a cost that, discounted by 40%, translates to one of the best values Music Direct has ever offered.

State-of-the-Art Build-Quality Nets Sonic Results
AudioQuest Columbia is built around AudioQuest’s wonderful PSC+ copper conductors, an ultra-pure copper that has delivers unmatched even-balanced frequency response with speed, detail, and dynamics. Polyethylene tube insulation on all three of the conductors (positive, negative and ground) minimize the interaction between the the conductor and the insulation for greater air and transparency. AudioQuest's proprietary Dialectic-Bias-System keeps noise at bay and dramatically lowers the noise floor of the cable.

Patented Noise-Dissipation System Leads to Incredible Value
The AudioQuest 72V DBS system smooths frequency response and the Cold-Weld connectors eliminate harshness. The three-layer Noise-Dissipation System protects the entire cable from the deleterious effects of airborne noise. Standing on its own, Columbia is a wonderful-sounding cable capable of bringing out the best in any system, but perhaps the most astonishing thing about Columbia is how close it sounds to its big brothers at a fraction of their prices. Maybe it's not so surprising after all. Columbia uses the same conductors as Colorado, the same Noise-Dissipating shielding as Niagara and the same connectors as Sky, and costs a fraction of their prices.

Patented Value-Dissipation System

hey actually can anyone instruct me into how to rip regular old decent-sounding 320 MP3s from hi-res 24-96 FLACs? Do I have to downsample the flacs first or can I just throw them in xAct and make MP3s from them?

use this:

Columbia employs AQ’s patented Dielectric-Bias System to dramatically lower the noise floor and smooth frequency response.

(also asfaik you can just throw them in itunes or w/e and they will make Mp3s out of them)

I've used Switch to convert FLACs

Maybe it's not so surprising after all. Columbia uses the same snake oil as Colorado, the same snake oil as Niagara and the same snake oil as Sky, and costs a fraction of their prices.

i was just concerned specifically about the hi-res aspect, like I know you can't just convert a 24-96 flac into a wav without some sort of downsampling process, wasn't sure if the same applies to MP3s.

What? Of course you can have a 24/96 wav. That's what they made the flac from

hey actually can anyone instruct me into how to rip regular old decent-sounding 320 MP3s from hi-res 24-96 FLACs?

I use All2MP3.

xld imo
My standard for audio conversion is to look at the guidelines for whatever the snootiest private torrent sites use

http://bgr.com/2015/02/19/sony-premium-sound-memory-card/

i also use all2mp3

Perfect for the potential Audiophile Snake Oil aspect, Mediamonkey allows you to set both the bitrate and the "Encoding Quality". I have found no documentation, but i presume the highest encoding quality regards the extent that the tracks are read, written and compared.

------------------------------------------------

On other things Snakeoil; Sony claims this SD card makes your audio sound better by minimizing excess electrical noise......... sheesh

the problem I found with Mediamonkey (MM in itself was really great) is it seems to play badly with itunes. Like unfortunately I have to have itunes on my machine bc of owning an iphone, this is literally the only reason itunes is still tolerated by me bc I play my music on a Rockboxed Sansa Clip with SD cards, I tag my files with xAct and do my lossless to lossy conversions with xAct... anyway just the fact that MM and iTunes were both active on the same machine led to some serious snafus for me and I probably won't fuck with MM again until I have done away with itunes altogether...

Good luck.

More props to Rockboxed Sansa Clip!

so fucking great! only pitfall is battery life of course.

might try the 200 dollar walkman that takes micro SD cards this year. Basically I don't foresee ever using a player that doesn't have expandable memory ever again, it's just too fucking satisfactory for me.

Ha, I thought the revive was about this bit of preciousness today:

http://www.slate.com/articles/arts/culturebox/2015/02/audiophiles_neil_young_s_pono_has_brought_unfair_scorn_for_lovers_of_high.html

#notallaudiophiles

question : how can a 40W amp blow speakers that are rated at 120W ?

i need to replace my floorstanders as the tweeters have blown.

arse.

(that said i got my bonus today, so, good timing as it means i can move to the next level of floorstanders .. )

Like unfortunately I have to have itunes on my machine bc of owning an iphone, this is literally the only reason itunes is still tolerated by me

this is exactly what my situation is

question : how can a 40W amp blow speakers that are rated at 120W ?

i need to replace my floorstanders as the tweeters have blown.

arse.

(that said i got my bonus today, so, good timing as it means i can move to the next level of floorstanders .. )

― mark e, Friday, February 20, 2015 1:18 PM (41 minutes ago) Bookmark Flag Post Permalink

did you turn it up really loud? because i think the thing w/higher rated amps is they deliver clean power, not distorted signal which can be damaging

yes i did.
no neighbours .. so i went full on.
cannot deny, it was truly awesome
i was prepping myself for the j&mc/psychocandy gig this week basically
i can compensate via adding more treble via the amp etc, but hey.
time to upgrade.
any excuse.

40W into what impedance?

also Matt could be right and maybe the 120 W rating doesn't cover full spectrum