Oh no! More boring computer problems! Oh no!

Message Bookmarked

Bookmark Removed

Not all messages are displayed: show all messages (1739 of them)

is there any way to recover emptied trash in OSX? unlike the PC world, there seem to be a dearth of "undelete" type programs for macs.

― renegade bear shot by cops on frat row (vahid), Monday, 12 June 2006 01:27 (twenty years ago)

Norton Utilities has Unerase in it.

― svend (svend), Monday, 12 June 2006 02:00 (twenty years ago)

YSI?

― renegade bear shot by cops on frat row (vahid), Monday, 12 June 2006 03:23 (twenty years ago)

totally unrelated, but saves starting a whole new thread - what's the website that helps fill in passwords if i want to read teh paper?

― Jena (JenaP), Monday, 12 June 2006 04:51 (twenty years ago)

bugmenot.com

― Forest Pines (ForestPines), Monday, 12 June 2006 04:52 (twenty years ago)

thx!

― Jena (JenaP), Monday, 12 June 2006 04:53 (twenty years ago)

but 403 :(

― Jena (JenaP), Monday, 12 June 2006 04:53 (twenty years ago)

hmm, it seems to be working for me.

― Forest Pines (ForestPines), Monday, 12 June 2006 04:54 (twenty years ago)

finally works in opera, but not in safari - thanks again Forest Pines!

― Jena (JenaP), Monday, 12 June 2006 04:57 (twenty years ago)

ok so poor henry is still not working. i took him to a repair shop where we established that the problem is definitely not the power supply (or not the actual lead, anyway, what's inside might be a different matter) but to find out anything beyond that would have cost me £55, and that might just be for them to say "sorry, you are FUCKED. ha ha ha!" someone had told me the flashing lights on the front (that usually indicate if you're running off mains or battery power and if your battery's about to die) were a service code or error code and all i had to do was figure out what it meant, then it would be sortable without taking it to a repair shop where they would charge me £100 for 20 minutes' work. so i looked around the interweb and on the dell site (it is dell yes, an inspiron 1150) and did find some stuff about error codes, but nothing that seemed to match up to what my laptop's doing. there's a troubleshooting thing on the dell site and i went through all the steps there (try this, unplug that, take out the battery, take out the hard drive, wait 7 minutes, hop around the computer widdershins singing the national anthem) and none of it worked. there was some stuff about error codes but they were referring to the leds for the caps lock, number lock etc which are at the top right of the keyboard (which are totally inactive on mine), not the ones that are on the front.

if anyone can help me solve this i will do you a big favour in return! i don't know what but if it's in my power i will do it. paint a room in your house. proofread your 1000 page stream-of-consciousness novel. carry something heavy up a hill. feed your cat.

if not has anyone ever used these guys? - www.millteccomputers.co.uk - they have something called a bronze service (which seems to differ from silver and gold in that it takes a week rather than 72 or 24 hours) which costs £65, which i can pay if it means i get a working laptop back at the end.

― emsk ( emsk), Monday, 12 June 2006 07:20 (twenty years ago)

...teach you to fix punctures on your bike? fix your punctures for you?

clear up after your party?

― emsk ( emsk), Monday, 12 June 2006 10:59 (twenty years ago)

No no, I get it. I wouldn't be a lot of use even if I did have the internet is the thing, and I won't have it for ages anyway. I mean, I can follow directions on help sites, but it sounds like you've tried a fair bit of that.

― Andrew Farrell (afarrell), Monday, 12 June 2006 11:05 (twenty years ago)

That sounds nasty, It might be the power distribution board which only a proper service engineer can replace. It's likely to cost over an above the £65 though. I can help with data rescue, but the laptop sounds fucked.

― Ed (dali), Monday, 12 June 2006 11:17 (twenty years ago)

:_(

how much? ish? *steels self*

― emsk ( emsk), Monday, 12 June 2006 14:29 (twenty years ago)

You could end up paying a couple of hundred I reckon.

I can rescue you enough bits from the dump pile at work to make you a desktop. What apps do you need to run?

― Ed (dali), Monday, 12 June 2006 14:48 (twenty years ago)

I HAVE A QUESTION!

what are people using to tag and organise their digiphotos? Picasa seems to be surprisingly crappy. i know it's free and all, but really...

― Slumpman (Slump Man), Monday, 12 June 2006 21:29 (twenty years ago)

adobe bridge is great for professional use, i think.

― Sterling Clover (s_clover), Monday, 12 June 2006 22:11 (twenty years ago)

I installed Adobe Photoshop Album (which seems perfect and easy to use).

Now i just need to decide what sort of tags are sensible to use. People in the shot, place taken and year for starters...

― Slumpman (Slump Man), Tuesday, 13 June 2006 15:42 (twenty years ago)

Okay ILX, help me from tossing my laptop out the computer. Anyone know Excel?

I have a file with three sets of scores that are from 3-15. I would like to highlight any score that is more than 4 points from the other scores to get a list of ones that deviate highly.

I have gotten as far as knowing that I need to do Conditional Formatting and select Formula, but I cannot for the life of me get a formula that works. The ranges of the scores are C3:C300, D3:D300, and E3:E300.

Can anyone help puhleaze???

― Aaron W (Aaron W), Friday, 16 June 2006 18:25 (twenty years ago)

Why is Excel designed to only be used by people with engineering degrees? Eff you Bill Gates. I'm glad you're stepping down!!

― Aaron W (Aaron W), Friday, 16 June 2006 18:39 (twenty years ago)

Hint: people with engineering degrees don't use excel

― lord pooperton (ex machina), Friday, 16 June 2006 18:44 (twenty years ago)

Dammit I thought you were going to tell me how to set this up. Yeah, but if I did have an engineering degree I could figure out how to create a super simple formula.

― Aaron W (Aaron W), Friday, 16 June 2006 18:45 (twenty years ago)

aaron w, have you tried conditional formatting? i use it on a "scorecard" that measures different performance measures at our facilities.

― otto midnight (otto midnight), Friday, 16 June 2006 18:46 (twenty years ago)

aaron w, obviously i have a reading comprehension problem.

― otto midnight (otto midnight), Friday, 16 June 2006 18:50 (twenty years ago)

ok, you're looking to highlight any score that is more than 4 points from the other scores. what other scores? what are the baseline scores? i'm not sure what you're comparing.

― otto midnight (otto midnight), Friday, 16 June 2006 18:53 (twenty years ago)

Thanks in advance for the help.

So, there are three sets of scores, and I'd like to highlight any that are +/- 4 points away from the other scores... Kind of a real basic standard deviation analysis.

Here's as far as I have got, but I have a feeling I'm a long way off. For the C2:C300 range, I am using...

=NOT(D2:D300+3)OR(D2:D300-3)OR(E2:E300+3)OR(E2:E300-3)

Of course this doesn't work.

― Aaron W (Aaron W), Friday, 16 June 2006 18:55 (twenty years ago)

I went with 3 instead of 4 away, but hopefully you get the drift.

― Aaron W (Aaron W), Friday, 16 June 2006 18:57 (twenty years ago)

yeah i'm trying and can get it work in a single cell but it logic takes a step out the fucking window when i try to apply it to a range of cells. more as it develops.

― otto midnight (otto midnight), Friday, 16 June 2006 19:16 (twenty years ago)

Thanks for your help. I'm still playing around with it as well. Of course, with all the time I've spent on this I could've just manually gone through all the scores. Blurgh!!

― Aaron W (Aaron W), Friday, 16 June 2006 19:20 (twenty years ago)

this isn't even my stuff but i know i've done this before but it was so long ago i forget. i don't think i used a formula, i think i used cell value is equal to/does not equal but whatever. this is pissing me off and i have to figure it out.

― otto midnight (otto midnight), Friday, 16 June 2006 19:29 (twenty years ago)

Well at least I've ruined two people's days.

― Aaron W (Aaron W), Friday, 16 June 2006 19:30 (twenty years ago)

i can get it to work on a single cell but it won't let me do a range. when i use the format painter to copy the formatting it applys the formatting of the original range. so wile for cell C3 i have for condition one cell value is not between =$D$3-3 and +D$3+3 (then i have it set to format it with a bright green cell fill) then condition 2 cell value is not between =$E$3-3 and =$e$3+3 it will work in c3. but when i use the format painter to apply the formatting to cells c3:c9 it still uses D3 and E3 in the formatting.

fuck this i need a goddamn drink. 52 minutes til quitting time, i can be in a bar in 90 minutes.

― otto midnight (otto midnight), Friday, 16 June 2006 19:38 (twenty years ago)

Oh don't waste any more time with it! Thanks for your help, and please do go have a drink!!

― Aaron W (Aaron W), Friday, 16 June 2006 19:41 (twenty years ago)

when/if you figure it out post it here!

wait a minute, why don't i just go into that damn scorecard and see how i did it?

― otto midnight (otto midnight), Friday, 16 June 2006 19:47 (twenty years ago)

actually the scorecard isn't much help as i'm comparing facility scores to a set criteria. that's why i was able to use the format painter last time.

good luck.

― otto midnight (otto midnight), Friday, 16 June 2006 19:48 (twenty years ago)

Yeah I'm giving up. Cheers!

― Aaron W (Aaron W), Friday, 16 June 2006 19:54 (twenty years ago)

two weeks pass...

You still looking to do this? I can probably help.....

I've also made some Excel animation which you might be interested in.

― ZOT! (davidcorp), Wednesday, 5 July 2006 11:55 (nineteen years ago)

two weeks pass...

http://static.flickr.com/78/194563147_3530b8388d.jpg?v=0

― james madison duff (duff), Friday, 21 July 2006 06:53 (nineteen years ago)

Don't use PowerMax -- those assholes sold me a refurb disguised as a new computer. I had to wipe the HD and reinstall the OS because they hadn't done it yet and they didn't know what "Valued Customer"'s password was.

― Whitman Mayonnaise (Rock Hardy), Friday, 21 July 2006 12:28 (nineteen years ago)

wow, that's pretty bad!

― Machibuse '80 (ex machina), Friday, 21 July 2006 12:33 (nineteen years ago)

And I have 8 months of warranty left instead of a year because it starts when it was ORIGINALLY sold.

― Whitman Mayonnaise (Rock Hardy), Friday, 21 July 2006 12:37 (nineteen years ago)

the fuck is a usb music controller doing in startupitems?

― TOMBOT (TOMBOT), Friday, 21 July 2006 12:42 (nineteen years ago)

Can anybody advise me on the fake security alerts that have appeared in my winXP system tray? Adaware and Search&Destroy have failed to acknowledge them and googling brings up some false advise pointing to dodgy malware.

Anyone?

― Slumpman (Slump Man), Friday, 21 July 2006 12:52 (nineteen years ago)

Are they Spyfalcon?

― M. V. (M.V.), Friday, 21 July 2006 23:09 (nineteen years ago)

They're not the ones that say you may be using a non-legitimate copy of Windows, are they?

― Sean Carruthers (SeanC), Friday, 21 July 2006 23:29 (nineteen years ago)

Just got an Acer Aspire 5014WLMi laptop. Having a problem with audio playback through the dvd drive. Audio's fine from hard drive i.e mp3's, wmv, games etc but play an audio cd or movie dvd it's distorted and 'clicks' (though picture is fine in dvd). Have upated drivers for the sound card (Realtek AC97) and codecs for windows media player to no avail. The drive is a TSSTcorp TS-L532A DVDRW, couldn't find drivers for this.

Don't know if it's a hardware or software problem, girl I bought it from said she think it started after she installed nero media and windvd, which i've uninstalled. Pity she didn't mention it in her lising, grrr.

― Billy Dods (Billy Dods), Wednesday, 26 July 2006 11:11 (nineteen years ago)

um, might have seen something similar on linux box at home - sound card was ok playing back 44.1khz samples (ie cds and mp3s) but didn't like 48khz samples (dvds). maybe try to find some 48khz samples from somewhere (rip the audio from a dvd?) and see if it's that. see if there's a way of setting sample rate of card? dunno.

― Koogy Yonderboy (koogs), Wednesday, 26 July 2006 11:42 (nineteen years ago)

VLC can force the sample rate to an arbitary value.

― steal compass, drive north, disappear (tissp), Wednesday, 26 July 2006 11:47 (nineteen years ago)

(Well, it up/downsamples, but you know what I mean)

― steal compass, drive north, disappear (tissp), Wednesday, 26 July 2006 11:48 (nineteen years ago)

I've noticed lately that my PC has problems playing audio from the hard disk when the DVD drive is being accessed - it skips terribly.

― Forest Pines (ForestPines), Wednesday, 26 July 2006 11:49 (nineteen years ago)

Skipping 1639 messages at this point... Click here if you want to load them all.

You must be logged in to post. Please either login here, or if you are not registered, you may register here.